Digitus DA-81003 - Code 128 Settings; Permit and Prohibit Reading Function; Reading Length Setting

36
Users can read the following setting codes to configure the UPC-E1 additional code enabling
and disabling.
UPC-E1-2-digit additional code enable
**UPC-E1-2-digit additional code disable
UPC-E1-5-digit additional code enable
**UPC-E1-5-digit additional code disable
7.7 Code 128
7.7.1 Permit and prohibit the reading function
The user can enable or disable the Code 128 barcode reading function by reading the
following setting codes.
**Allow Code 128 reading
Prohibit Code 128 reading
7.7.2 Reading length setting
Users can set the shortest and longest reading length of Code 128 by reading the following
setting codes.
Code 128 min length of the message 0
**Code 128 min length of the message 4