Digitus DA-81003 - UPC-E0 Settings; Permit and Prohibit Reading Function; Additional Code Forced Output Function

34
7.4.3 UPC-A conversion EAN 13 enable
The user can allow/disable the conversion of UPC-A to EAN 13 by reading the following
setting codes.
Allow UPC-A to EAN 13 **Prohibit UPC-A to EAN 13
7.5 UPC-E0
7.5.1 Permit and prohibit the reading function
The user can allow and prohibit the UPC-E0 barcode reading function by reading the
following setting codes.
**Allow UPC-E0 reading
Prohibit UPC-E0 reading
7.5.2 Additional code forced output function allows and prohibits
The user can enable and disable the UPC-E0 additional code forced output function by
reading the following setting codes.
UPC-E0 Force output additional code
**UPC-E0 No additional code required