23
6.2 Suffix
The suffix is a string of character strings defined by the user after the decoded data. The
user can add and modify the suffix by reading the following setting codes.
Allow suffix
**Prohibit adding suffix
Read the following setting codes. With the "Data Code" setting code and the "Save" setting
code, the user can modify the suffix content.
Modify suffix
Note: The suffix allows up to 15 characters. For each suffix character, two hexadecimal
values are used to represent it. Refer to Appendix F for the hexadecimal conversion table of
character values.
6.3 Code ID
6.3.1 Add Code ID
Code ID uses one character. Users can add Code ID by reading the following setting codes to
identify different barcode types.
Allow Code ID
**Prohibit adding Code ID
Note: Read the following setting codes to restore the default Code ID value of the barcode.
Refer to Appendix E for the default list.
To Next Page
Loading...
