6
2.2 Storage Mode
Read barcodes and store the barcodes in scanner’s own memory. You can upload the data to
computer in batches when you need them. Internal storage saves up to 100,000 barcodes.
Note: In storage mode, the barcode will be stored in the scanner and will not come up on
your computer instantly. The barcode comes up on your computer only when you scan the
settings code "upload data".
To convert scanner from "instant upload mode" to "storage mode", scan the following
barcode "Storage mode ".
Storage mode
Put the cursor in the blank, and then scan code below to upload data.
Upload data
Put the cursor in the blank and then scan the code below to show total number of stored
barcode.
Show total storage
Scan the barcode "Zero clearing" to clear all stored barcode. (For storage mode only)
Zero clearing
Scanning indication:
(1) The buzzer emits a sound like "DI" when the barcode is saved successfully in the built-in
memory of the scanner.
(2) The buzzer blared for three seconds when the barcode cannot be saved in the built in
memory of the scanner. The space of memory is not enough and cannot store any more
To Next Page
Loading...
