Format show spanning-tree mst detailed <0..4094>
Mode Privileged Mode
16.2.2) show spanning-tree mst instance
This command display ports information on a MST instance
Format show spanning-tree mst instance <0..4094>
Mode Privileged Mode
16.2.3) show spanning-tree mst summary
This command display all MST instance information
Format show spanning-tree mst summary
Mode Privileged Mode
16.2.4) show spanning-tree status
This command is used to display spanning-tree status
Format show Spanning-tree status
Mode Privileged Mode
17) show storm-control
This command is used to display storm-control information
Format show storm-control
Mode Privileged Mode
18) show sysinfo
This command is used to display system information including system up
time
Format show sysinfo
Mode Privileged Mode
19) show switch
This command is used to display switch information
19.1) show switch admin-time
This command display the age time of web and console
Format show switch admin-time
Mode Privileged Mode
19.2) show switch age-time
This command display the age time of L2 table
Format show switch age-time
Mode Privileged Mode
19.3) show switch mac-table
This command is used to display address resolution protocol cache
Format show switch mac-table
Mode Privileged Mode
19.4) show switch mcast-table
This command display multicast address table
Format show switch mcast-table
Mode Privileged Mode
20) show trapflags
This command is used to display the value of trap flags that apply to the
switch
Format show trapflags
Mode Privileged Mode
21) show vlan
This command is used to display vlan configuration
21.1)show vlan member
This command display vlan configuration
Format show vlan member <1..4094>
Layer 2/2+ Management Switch Series 20
To Next Page
Loading...
Need help?
General
