13
（2）Serial port information page
It is a serial port configuration page; the page displays serial baud rate and other related
information. When the host through the serial port terminals (such as Windows, HyperTerminal)
to the management of switches, serial console on the COM port configuration must be consistent
with this page information.
Serial port information page
（3）User management page
This is a user management page, the user can modify this switch anonymous user (admin)
password, Telnet and the Web without opening a multi-user, and they all use the same
anonymous user's password. Passwords are case-sensitive, and can be up to 16 characters. If you
want to change your password, the user needs to enter the new password twice, once the user
clicks the application button, the new password is activated, then if the switch is not enabled
multi-user, will display the login dialog box, and require the user to re - login the web page, with a
new anonymous user password.
Meanwhile through this page user can configure the multi-user, switch if in the default is no multi-
users that is, not enabled the multi-user management functionality, at this time does not require
multi-user login user name and password authentication. For Telnet, when adding a user name,
multi-user management features were enabled, and when removed all of the user, multi-user
management functionality has been closed. For the Web, when adding a user name, if it is
privileged user, multi-user management functionality was enabled. When all of the privileged
users have been deleted, multi-user management functionality has been closed. When the multi-
user management features enabled, the anonymous user's password will not take effect, log
Telnet and the Web requires a multi-user user name and password authentication. When the
multi-user management function is turned off, at this time if the configured anonymous user's
password, log on Telnet, and Web need anonymous user's password authentication
To Next Page
Loading...
