Digitus DN-95359 - LLDP Global Configuration

55
4.20. LLDP Global Configuration
（1）LLDP Global Configuration
This page is use to configure LLDP global parameters.
LLDP Global
Enable or disable the global LLDP, default is disabled
Hold-multiplier
Set the hold-multiplier, default is 4
Reinit-delay
Set the Reinit-delay, default is 2 seconds
Tx-delay
Set the tx-delay, default is 2 seconds
Tx-interval
Set the tx-interval, default is 30 seconds
LLDP Global Configuration page