OPERATIONAL MANUAL
D03S THERMAL TRANSFER OVERPRINTER - 11 -
3.2 INSTALLATION REQUIREMENTS
Please make sure all below index are fully checked before installation.
1. Packaging machine runs well and all the signals are working;
2. Stable power supply: AC 100V-240V±10V (MAX 3A);
3. Compressed air: max. 0.6Mpa, dry and uncontaminated air
4. Reliable printing signal——can be from relay, NPN/ PNP sensor, photo sensor or PLC
5. Enough space for installing printer
6. The installation should be done by DIKAI engineer or well trained operator
3.3 STANDARD BRACKETS
INTERMITTENT
1. Square-Shape Side Plate Assembly 2. Fixed Slider Block Assembly
3. Rubber Anvil Assembly 4. Transition Roller Assembly
To Next Page
Loading...