OPERATIONAL MANUAL
D03S THERMAL TRANSFER OVERPRINTER - 5 -
D03S is available in two printer types, flexible for on-site installation:
D03S Model：
D03S Right Hand（D03S RH）
D03S Left Hand（D03S LH）
D03S can print lot number, date and time, variable data, etc directly onto kinds of packing film, variable data
can be modified on controller.
1.3 LABEL
1. High Voltage
This label is located on the back panel of Controller Box.
This label warns the operator that the printer should be well ground connected.
If it’s hiden after installation, please stick another WARNING label in conspicuous place.
Electrical problems should be solved by well-trained engineer.
2. GROUND CONNECTION
This label warns that machine should be ground connected.
To Next Page
Loading...