Dionex UltiMate 3000 - Page 26

UltiMate 3000 Nano and Cap- System Installation and Application
22
No. Description Part No.
1
Nano HPLC Capillary HPLC Micro HPLC Monolith. HPLC
1 Solvent lines (analytical) 6030.2548
2 Solvent lines from degasser to proportioning valve
(set of 3 including the appropriate fittings)
6035.2540
3 Connection proportioning valve to working pump head (including fittings) 6035.2514
4 Capillary from working pump head to equilibration pump head (including fittings) 6035.3014 (standard) or 6037.3011 (biocompatible)
5 Capillary from equilibration head to outlet unit (including fittings) 6035.3014 (standard) or 6037.3011 (biocompatible)
6 Inline filter (0.5 µm) in frit holder on outlet unit 6000.0045 (standard) or 6282.0022 (biocompatible)
7 Capillary from pump to flow splitter
Long connection (system with detector)
short connection (system without detector)
6035.2550
2
(standard) or 6037.2550
2
(biocompatible)
6035.2553
2
(standard) or 6037.2553
2
(biocompatible)
8 Capillary from separation column to detector flow cell The flow cell is shipped with appropriate capillaries.
9 Separation column 160321
2
160295
2
160282
2
161409
2
10 Capillary from autosampler switching valve to separation column (PEEKsil)
Standard
Biocompatible
6720.0024
2
6721.0024
2
6720.0025
2
6721.0025
2
6720.0026
2
6721.0026
2
6720.0025
2
6721.0025
2
11 Capillary from autosampler switching valve to flow splitter (PEEKsil)
Standard
Biocompatible
6720.0027
2
6721.0027
2
6720.0028
2
6721.0028
2
6720.0029
2
6721.0029
2
6720.0028
2
6721.0028
2
12 Standard needle (2.4 µl, fused silica) 6820.3010 (standard) or 6821.3010 (biocompatible)
13 Sample loop
Standard
Biocompatible
6820.0015
2
6821.0015
2
6820.0018
2
6821.0018
2
6820.0015
2
6821.0015
2
1
The part number refers to the packing unit. For more information, contact your Dionex Sales Representative.
2
These parts are included in the Direct Injection Kit for the related application (→ section 0, page 64).