Dionex UltiMate 3000 - Page 44

UltiMate 3000 Nano and Cap- System Installation and Application
40
Dionex recommends that you arrange the system modules as shown below:
Fig. 20: Module arrangement for parallel LC
The system includes the modules listed in the table below. In addition, the appropriate
Parallel LC Kit (→ section 8.6, page 66) is required:
Part No. System Module
Nano/Nano
HPLC
Capillary/Capillary
HPLC
Monolith./Monolith.
HPLC
SR-3000 5035.9200
LPG-3400 5035.0045 (standard) or 5037.0055 (biocompatible)
WPS-3000 or
WPS-3000 T
5820.0010 (standard) or 5821.0010 (biocompatible)
5820.0020 (standard) or 5821.0020 (biocompatible)
SRD-3600 5035.9230
DGP-3600 5035.0050 (standard) or 5037.0060 (biocompatible)
VWD-3100*
VWD-3400*
5074.0005
5074.0010
*Please note that flow cells must be ordered separately, for order numbers see page 15.
FLM-3200
Standard
Biocompatible
5720.0020
5721.0020
5720.0025
5721.0025
5720.0025
5721.0025
FLM-3300
Standard
Biocompatible
5720.0030
5721.0030
5720.0035
5721.0035
5720.0035
5721.0035
Parallel LC Kit
Standard
Biocompatible
6720.0054
6721.0054
6720.0055
6721.0055
6720.0056
6721.0056
SRD-3600
Solvent Rack
DGP-3600
Pump
VWD-3x00
Detector
FLM-3300
Flow Manager
WPS-3000 or
WPS-3000 T
Autosampler
LPG-3400
Pump
SR-3000
Solvent Rack
FLM-3200
Flow Manager