42
Function Step Function Wire Color
1
Auto Learn Standard Configuration* (default)
2 Arm only
3 Disarm only
4 Silent Mode™/Remote Valet/Trunk Release RED/WHITE
5 Remote Start
6 Channel 4 VIOLET/BLACK
7 Channel 5 WHITE/BLACK
8 Channel 6
9 Short Run/Turbo
10 Timer Mode
11 Arm/Disarm/Panic
12 Panic only
13 Defogger Control**
14 Delete all remote controls***
*NOTE: For Auto Learn Configurations, refer to the remote control section of this guide.
**NOTE: The remote control will play Rear Defogger animation only when pressing the Rear Defogger button
configuration described in the remote control section
***NOTE: If any button from a known remote control is programmed to function step 14, all remote
controls will be erased from memory and all features will revert to their default setting. This is useful
in cases where the customer's remote controls are lost or stolen.
To Next Page
Loading...
