© 2006 Directed Electronics—all rights reserved
46
remote control programming
The remote control has programmable features that can be changed to fit the users preferences. Programming
can be performed using the programming and function buttons 6 thru 10 to select the feature menus and
change feature settings.
Function button operations during programming:
• Press the
or
button to scroll and highlight menu and feature items.
• Press the button to choose the highlighted item
• Press the
button to exit programming anytime
Enter programming:
Press and hold for 3 seconds the programming button on the rear of the remote control. The programming
main menu will appear. Use the function buttons as described above to navigate and change the features.
Exit Programming:
Press the
button anytime to save the settings and exit programming, or, if more than 10 seconds
lapses between button presses, the remote control will automatically save the settings and exit program-
ming mode.
Sleep mode:
The remote control can be put into sleep mode to save battery power when it will not be used for long
periods of time. It will not respond to any RF signals or function button presses when asleep.
1. Enter programming mode
2. Scroll to highlight the OFF icon
3. Press the button to choose and access the POWER screen, CONFIRM is highlighted.
4. Press the button to enter sleep mode or highlight exit and press the button to return to the
main menu.
5. Press the
button anytime to exit programming.
Wake Up the remote control:
To wake up the remote control press and hold the program button about 3 seconds or until a beep is heard.
The display will play the brand introduction and enter normal operation mode.
To Next Page
Loading...
