47
Set the 12 hour Clock:
1. Enter programming mode
2. Scroll to highlight the Clock icon
3. Press to choose the Clock and access Clock set screen
4. Scroll and highlight a digit or A/P and press to change the digit.
5. Press
anytime to save the new setting and exit.
Page mode on/off:
When Page is off, the remote control will not receive Pages or output Page Notifications or Alerts. It will
only receive Command Reponses.
1. Enter programming mode
2. Scroll to highlight OPERATION
3. Press to choose the operation menu screen
4. Scroll to highlight PAGE and press to choose.
5. Scroll to highlight the desired setting.
6. Press to save and return to the Operation menu or
to save the setting and exit.
Beeps on/off:
When the beeps are off, the remote control will only show animations or icons for Page Notifications. Alarm
Page Alerts will be eliminated.
1. Enter programming mode
2. Scroll to highlight OPERATION
3. Press the button to choose the operation menu screen
4. Scroll to highlight BEEP and press to choose.
5. Scroll to highlight the desired setting.
6. Press to save and return to the Operation menu or
to save the setting and exit.
Custom zone ID:
Use this menu item to select the icon that will be displayed when a particular zone is triggered.
1. Enter programming mode
2. Scroll to highlight OPERATION
To Next Page
Loading...
