129
Appendix 2: How to Network Your DVR
Step 5:
Go to your DIRECTV Plus
®
DVR:
Press Menu On Your DIRECTV Remote>
Select Parental, Fav’s & Settings >
Select System Setup>
Select Network>
Select Connect Now
If your DVR immediately recognizes the network connection you will
receive this Congratulations screen.
(See Figure A.)
If your DVR does not immediately recognize the network connection,
you will get the option to choose your Connection method.
You should choose Powerline.
(See Figure B.)
Verify that You are Connected!
Figure A
Figure B
To Next Page
Loading...
