- 27 -
0DT866 2016-01-25
7. ALARMS
8. INTERLOCK
MESSAGE SITUATION NOTES
Ditec Entrematic door closed waiting for command
Opening of VBUS IBUS door opening
Door open - automatic closing time Door open
Closing of VBUS IBUS door closing
Input 40 closed; input 8 open intervention of photocell When door is moving
input 40 open; input 8 closed Primary safety device intervention
(SLEC / SAFETY EDGE)
When door is moving
Limit switches open Intervention of safety microswitch on
manual opening device / intervention of
thermal protection on motor / opening
(A) and closure (C) limit switches
simultaneously active.
Opening safety device activated photocell engaged when door is closed
and door does not open
Message that only appears if the
"safety in open" function is set to YES
on the advanced menu (step 7).
Door stopped stop command activated
+24V
INPUT
1 IN NC C NO
Funzionamento
Logico
PORTA 1
QE 52E
QE 52E
PORTA 2
+24V
INPUT
1 IN NC C NO
M4 M4
Logical operation
DOOR 1 DOOR 2
EN
To Next Page
Loading...
