DITEC VALOR - Floor Guide Installation

15
IP1950EN - 2013-09-13
The floor guides must be made of an antifriction material such as PVC, NYLON, TEFLON. The
length of the floor guide should not be greater than the overlap of between the fixed and mobile
door wing and must not enter the doorway.
The measurements of the code 0KP515AB floor guide for framed door wings are indicated in the
diagram.
min 21
max 40
10
22
10
HM
50
The measurements of the code KPAM45 floor guide for telescopic door wings are indicated in the diagram.
12
5
12
42 42
19
50
HM
The floor guide for the PAMH60 door wing has the measurements indicated in paragraph 5.3.
The measurements of the code 0KP369 floor guide for glass door wings are indicated in the diagram.
10 HVM
40
10-12
25
5
50
5.7 Floor guide installation