21
IP1950EN - 2013-09-13
In the event of maintenance, malfunctioning or emergency, pull the lock release lever VALSB down
and turn it to the right or lower the lock release lever LOKSBM (if installed) and move the door
wings manually into the open position.
To block the door wings again, reposition the lock release lever to the initial position.
WARNING: carry out the door wing blocking and release with the motor switched off.
Manual release instructions
DETACH AND DELIVER TO THE CUSTOMER
Entrematic Group AB
Lodjursgatan 10
SE-261 44, Landskrona
Sweden
www.ditecentrematic.com
To Next Page
Loading...
