PROGRAMMING P SERIES
Page 18 of 100
*"TIME" - TIME AND DATE SETTING ROUTINE
This function is used to set the year, month, date, and hour (military 24 hour clock).
Press select button 4 and "ENB#" will show on display with # showing the current setting for the enable routine.
"ENB#" - Time and Date Enable Routine
Press select button 4 and # will flash.
Press select button 2 to scroll between ENB0 and ENB1.
Press select button 4 with the display showing the setting you wish to use and display will return
to "ENB#".
Press select button 2 to scroll to "YEAR".
"YEAR" - Year Setting (2000 to 2099)
Press select button 4 and the current year setting will show on display.
Press select button 2 or 3 to change the year (2000 to 2099).
After pressing select button 4 to accept the year on the display, or select button 1 to keep the
year originally displayed, the display will return to “YEAR”.
Press select button 2 to scroll to "MTH".
"MTH" - Month Setting (01 to 12)
Press select button 4 and the current 2 digit month setting will show on display.
Press select button 2 or 3 to change the month (01 to 12).
After pressing select button 4 to accept the month on the display, or select button 1 to keep the
month originally displayed, the display will return to “MTH”.
Press select button 2 to scroll to "DATE".
"DATE" - Day of Month Setting (1 to 31)
Press select button 4 and the current 2 digit day of month setting will show on display.
Press select button 2 or 3 to change the day of month (1 to 31).
After pressing select button 4 to accept the date on the display, or select button 1 to keep the
date originally displayed, the display will return to “DATE”.
Press select button 2 to scroll to "HOUR".
"HOUR" - Hour and Minute Setting (0000 to 2359)
Press select button 4 and “hhmm” will be displayed, where “hh” is the hour (military time) and
“mm” is the minute.
The hour setting will be blinking to indicate it can be changed. Press select button 2 or 3 to
change the hour setting. Press select button 4 to save the hour setting and the minute setting
will start blinking to indicate it can be changed. Press select button 2 or 3 to change the minute
setting. Press select button 4 will save and return display to "HOUR".
Pressing select button 1 at anytime during this routine will return to "HOUR" with no changes to
the hour or minute settings occurring.
Press select button 2 to scroll to "DST".
"DST" - Daylight Saving Time Setting
This function is used to set the preferred daylight savings time setting.
Press select button 4 will display the current setting.
Press select button 2 or 3 to scroll through the "DST" options listed:
"OFF", no daylight savings time changes made.
"AUS", Australian rules - Set forward 1 hour at 1:00 am on the first Sunday in October;
Set backward 1 hour at 1:00 am on the last Sunday in March.
"EU"
European rules - Set forward 1 hour at 1:00 am on the last Sunday in March; Set
backward 1 hour at 1:00 am on the last Sunday in October.
"NA" North American rules - Set forward 1 hour at 2:00 am on the first Sunday in April;
Set backward 1 hour at 2:00 am on the last Sunday in October.
Press select button 4 with the display showing the setting you wish to use and display will return
to "DST".
Pressing select button 1 at anytime during this routine will return to "DST" with no changes to
the Daylight Savings Time settings occurring.
Press select button 1 to return to "TIME".
To Next Page
Loading...