PROGRAMMING P SERIES
Page 24 of 100
“STRT” - Start Discount Pricing
This function is used to set the day(s) and times to start discount prices.
Press select button 4 and “DAY” will show on the display.
“DAY” - Day of the Week Start Setting
Set this feature using instructions for “BLC1” "STRT" "DAY".
“HOUR” - Start Hour and Minute Settings
Set this feature using instructions for “BLC1" "STRT" "HOUR".
“STOP” - Stop Discount Pricing
This function is used to set the day(s) and times to stop discount prices.
Press select button 4 and “DAY” will show on the display.
“DAY” - Day to Stop Setting
Set this feature using instructions for “BLC1” “STOP” “DAY”.
“HOUR” - Stop Hour and Minute Setting
Set this function using instructions for “BCL1" "STOP" "HOUR".
“SEL” - Selection Affected by Discount Pricing
This function is used to set selection(s) which will be affected by discount prices.
Press select button 4 and “XX#” will be displayed, whereXX is the selection number and # is the
current setting for the selection number displayed. 0 = disabled, 1 = enabled.
Press select button 2 or 3 to scroll to the select button number you desire to change.
Press select button 4 with the select button number showing you wish to change (i.e.01#) and
the # will start flashing.
Press select button 2 or 3 to scroll between “XX 0” and “XX 1”.
Press select button 4 with the display showing the setting you wish to use to save that setting.
Press select button 1 with the display flashing the enable setting will keep the original setting.
Display will return to a solid XX #.
Press select button 1 to return to “SEL”.
Press select button 2 to scroll to “LESS”.
"LESS" - Discount Amount
This function is used to set the amount the price will be decreased for selection(s) and times
set. Press select button 4 and “##.##" will be displayed, where "##.##" is the current
discount that is set. Press select button 2 or 3 to change the discount amount (.00 to 99.99).
Press select button 4 with the display showing the discount setting you wish to use to save
that setting.
Press select button 1 with the display showing the discount setting will keep the original setting.
Display will show "LESS"..
Press select button 1 to return to "DISC".
Press select button 2 to scroll to "OVER".
"OVER" - MANUAL SWITCH OVER-RIDE ROUTINE (CON 2 must be enabled - C2 1)
This function is used to allow a key switch
(Key Switch Kit 626,020,44x.x4) to over-ride some of the
settings stored for normal operations.
This function can be programmed to control one or several of the following features: Free Vend Enable,
Vend Enable, Selection Blocking, Discount Pricing, Lighting Control and Refrigeration Control.
Press select button 4 and the display will show "FRE#".
Press select button 2 or 3 to scroll through the over-ride routines available.
Press select button 1 to return to "OVER".
"FRE#" - Free Vend Enable Routine
This function is used to set the vender to Free Vend. 0 = disable, 1 = enable.
Press select button 4 and “#” will start flashing.
Press select button 2 or 3 to scroll between "FREO" and "FRE1".
Press select button 4 with the display showing the setting you wish to use to save that
setting.
To Next Page
Loading...