DLab DM0636 - Page 36

33
9
S2-MP
(dimension
) mm
MTP(128×85
.6×15)
4000
12.1
2160
Cell
culture(128×
85.6×21)
4000
12.1
2160
DWP(128×8
5.6×45)
4000
12.1
2160
Kits(128×85.
6×60)
4000
12.1
2160
* ：15mlV means 15ml conical tube, as well as 5mlV and 50mlV.
Table11.1Rotors and adapters
11.1.3 Notice
（1）The centrifuge rotor can separate sample which density lower than 2.0g/ml,
if the samples density is over 2.0g/ml, please calculate allowable speed depending
on the following formula. Allow Speed (rpm)= Maximum speed×(2.0(g/ml)/Sample
density (g/ml))
1/2
（2）To prevent corrosion, remove the rotor from rotor chamber if do not use for a
long time, then detach the rotor lid and upside the rotor down to dry the tube holes.
（3）If some samples leaked in the rotor hole, wash the hole with water, apply a