DMP Electronics XR150FC User Guide

18 XR150FC/ XR550FC User’s Guide System Setup
Delet i g User C des
To d elete a user code, you must have a user code with a proÀle that
has user code authority.
1. Access the User Menu.
2. Press COMMAND until USERCODES?displays.
3. Press any Select key. The keypad displays
ADD DEL CHG BAT.
4. Pressthe second Select key, under DEL, to delete a user code
from the system. To delete a user code, you must have a user
code with a proÀle that has user code authority.
Note: Be careful not to delete all users with user code
authority from your system. Also, the user code used to
enter the user menu to delete codes c annot b e deleted. In
other words, you can not delete yourself.
5. At the USERNUMBER: - prompt, enter the user number you
want to delete and press COMMAND. The display changes to
USER # DELETED.
6. The display then changes back to USER NUMBER: - allowing
you to delete another user. Press the Back Arrow key twice
to exit the User Menu.
Ch ang i n g User C des
1. Access the User Menu.
2. Press the COMMAND key until USERCODES?displays.
3. Press any Select key. The keypad displays
ADD DEL CHG BAT.
4. Press the third Select key, under CHG, to change a user
code.
5. At the USER NUMBER: - prompt, enter the user number to
change and press COMMAND.
6. The display changesto CODENO: * * * * * *. Pressa Select key
and enter the new user code. Press COMMAND.
Note: Changing a user code does not change the user
number.
7. The display then shows the current user name. Press any top
row key to clear. See Entering Names in Appendix B to enter
a new name.
8. The display changes to PROFILE NO: -. Select the proÀle
number to assign a set of authorized functions to the user
code as outlined in the ProÀle Table on page 11.
9. After entering the proÀle number, the keypad displays
USER # CHANGED for 5 seconds followed by
USER NUMBER: -. This display allows you to change another
user code. Press the Back Arrow key twice to exit the User
Menu.
Br ser Feat ur e
Refer to Appendix B for diagrams showing you how to use the User
CodesAdd, Delete, and Change browsers.

DMP Electronics XR150FC Specifications

General

Brand	DMP Electronics
Model	XR150FC
Category	Control Panel
Language	English