DOD Technologies, INC • 675 Industrial Dr. Bldg. A • Cary, IL 60013 • Phone (815) 788-5200 • Fax (815) 788-5300
Tape advance system:
Advance Distance Verification:
The distance of each tape advance should be greater than .4 in. and less than .5 in. This can be verified
by following these steps:
1. Go to the Main Menu
2. Press the Load Tape tab
3. Mark the tape after the optic blocks on the left hand side. (See picture below)
4. Advance the tape by pressing Open Gate then Close Gate
To Next Page
Loading...