DOD Technologies, INC • 675 Industrial Dr. Bldg. A • Cary, IL 60013 • Phone (815) 788-5200 • Fax (815) 788-5300
Next, verify that the flow system offsets are between 1000 and 1400 in the System screen and try to
balance the flow again.
If none of these checks helps resolve the Low Flow Faults contact DOD Technologies Inc. technical
support.
I/O Verification Procedure:
This procedure should be followed when any of the following messages appear in the CL96 Event Log:
1. Output Module Communication Error (Service Fault)
2. Output module failure or not installed (Service Fault)
To Next Page
Loading...