Operating the moniceiver MC402
30
8.2 Using the remote control
I
The remote control has an operating range of 3 to 5 metres.
Selecting functions
You can select the functions shown directly via the display. You have to use the
and buttons on the remote control in order to navigate to the desired entry.
➤ Move the cursor in the direction desired by pressing the buttons and
(fig. 4 12 page 4).
➤ Confirm your selection by pressing OK (fig. 4 11, page 4) .
Replacing the batteries
!
A
Batteries need to be replaced if the range of the remote control reduces or the
remote control can no longer be used to operate the device.
➤ Open the cover on the back of the remote control.
➤ Replace the button batteries (type CR2025, 3 V) (fig. d 1, page 9).
➤ Close the cover.
NOTE
The moniceiver can be operated using the buttons and the device
display or using the remote control.
WARNING!
Keep batteries out of the reach of children. Seek medical help
immediately if a child accidentally swallows batteries.
NOTICE!
Make sure the polarity is correct.
MC402-IO-EN.book Seite 30 Montag, 21. November 2016 6:14 18
To Next Page
