Using Bluetooth devices MC402
50
Receiving call
I
➤ Press the button on the remote control or on the display to accept an
incoming call.
➤ Press the button on the remote control or on the display to hang up.
11.4 Using audio/video devices
Selecting the Bluetooth device as audio/video source
➤ Select the audio/video source, see chapter “Selecting the audio/video source”
on page 29.
Playing music
I
➤ Open the audio player of your Bluetooth device.
➤ Set the transmission mode to Bluetooth.
✓ The music played on the Bluetooth device will be sent to the moniceiver.
I
➤ Start the search for available Bluetooth devices.
➤ Select the moniceiver in the result list on your Bluetooth device.
NOTE
Once the mobile phone and the moniceiver are coupled, the device
automatically switches to the Bluetooth menu as soon as an incoming
call is received.
NOTE
This function is only available if the audio player is equipped with
(Advanced Audio Distribution Profile) and AVRCP (Audio Video Remote
Control Profile).
A2DP is a technology used by all manufacturers allowing wireless stereo
audio signals to be sent via Bluetooth to a corresponding receiving unit.
AVRCP is a Bluetooth profile for the remote control on audio or video
devices.
NOTE
This function may be blocked for some Bluetooth devices and you will
first have to enable this function. Refer to the operating manual of your
Bluetooth device.
MC402-IO-EN.book Seite 50 Montag, 21. November 2016 6:14 18
To Next Page
