Using Bluetooth devices MC402
48
11.2 Coupling Bluetooth devices
The coupling establishes the Bluetooth connection between your Bluetooth device
(e.g. mobile phone or audio/video device) and the moniceiver.
➤ Press the SRC button on the remote control until you have selected Bluetooth.
or
➤ Open the SOURCE menu on the display and select Bluetooth.
➤ Switch on the Bluetooth function on your Bluetooth device.
➤ Start searching for available Bluetooth devices by pressing +.
✓ The moniceiver starts searching for Bluetooth devices automatically and shows
the available devices in a list.
I
✓ At the same time, your Bluetooth device shows the monoceiver as available in the
settings for Bluetooth.
➤ Select the moniceiver in the event list on your Bluetooth device.
✓ The code for the coupling (factory setting: 0000) is requested.
➤ Enter the code in your Bluetooth device.
✓ The connection is made.
✓ The Bluetooth symbol lights up.
I
This is how to disconnect Bluetooth connection:
➤ Hold down the Bluetooth button.
✓ The connection is broken
NOTE
Refer to the operating manual of your Bluetooth device.
NOTE
Some mobile phones need to be preset for the Bluetooth connection to
be made automatically or not. You need to set your mobile phone so
that it connects automatically.
MC402-IO-EN.book Seite 48 Montag, 21. November 2016 6:14 18
To Next Page
