Playing media MC402
36
9.3 Inserting and removing a storage medium
Inserting a memory card
➤ Open the cover and insert an SD or MMC memory card into the slot until it clicks
into place (fig. 2 8, page 3).
✓ The device reads the files on the data carrier and shows them on the display.
Removing a memory card
➤ Change the audio/video source.
➤ Press the memory card in and release it again.
➤ Take the memory card out of the slot and close the cover.
Inserting a USB flash drive
You can connect a USB flash drive to the device.
I
➤ Open the cover and plug the USB flash drive into the USB port (fig. 2 7,
page 3).
✓ The device reads the files on the data carrier and shows them on the display.
Removing a USB flash drive
➤ Change the audio/video source.
➤ Take the USB flash drive out of the slot and close the cover.
NOTE
The device can play MP3 files which are stored on a USB flash drive.
USB flash drives with the following specifications are supported:
• USB flash drive with FAT32
• Names of folders and files with up to 256 characters
• ID3 tag version 2.0 (title/artist/album: 256 characters long)
• USB 1.1, USB 2.0 (with USB 1.1 speed)
Some USB memory sticks are not compatible with this device.
MC402-IO-EN.book Seite 36 Montag, 21. November 2016 6:14 18
To Next Page
