MC402 Using the radio
43
10.2 Listening to radio
The radio has the FM1, FM2, FM3, AM1 and AM2 frequency bands. Six presets are
available for each frequency band.
Selecting the radio as audio/video source
➤ Select the audio/video source, see chapter “Selecting the audio/video source”
on page 29.
Selecting the radio station
➤ Touch one of the P1 to P6 station presets on the display to select the required
station.
Searching for a radio station
You can set a radio station manually by using the cursor keys or via the number pad
to set the required frequency.
➤ Press the button to search for a station manually.
➤ Hold down the button for 2 seconds to search for a station automatically.
➤ Press SELECT to enter a radio frequency via the number pad.
Saving the radio station
➤ Press MEMORY to save the currently set station.
➤ Press the SCAN button to search for, and then save, the stations with the
strongest signals for the 6 presets of the activated frequency band.
✓ The station list is displayed.
➤ Press the preset for the station to be saved on.
Changing frequency
➤ Press the BAND button to change the frequency band.
/
/
MC402-IO-EN.book Seite 43 Montag, 21. November 2016 6:14 18
To Next Page
