Using Bluetooth devices MC402
52
Setting the automatic connection
➤ Set the automatic connection to ON or OFF.
When ON is selected, the mobile phone automatically connects to the moniceiver,
as soon as it is within a range of 10 m. When OFF is selected, the connection has to
be created manually.
Setting automatic call acceptance
➤ Set the automatic connection to ON or OFF.
When ON is selected and an incoming call is received on the connected mobile
handset, this call will be automatically accepted after 15 seconds. You can speak
hand-free using the device. When OFF is selected, you have to accept or reject an
incoming call.
Changing the coupling code
➤ Enter the new code.
Downloading the phone book
➤ Press on download to synchronise the phone book on your mobile.
MC402-IO-EN.book Seite 52 Montag, 21. November 2016 6:14 18
To Next Page
