MC402 System settings
55
Calibration Calibrate the touch screen as follows:
➤ Press calibration.
➤ Press start.
➤ Touch the display on the +-symbol in the centre for 2 seconds to
start the calibration.
The +-symbol moves in five steps and produces a path which you
have to follow with the finger.
➤ Follow the path.
Wallpaper ➤ Change the background.
You can select from eight display backgrounds or set up your own
background.
Gps Path Setup No function assigned
Symbol Description
MC402-IO-EN.book Seite 55 Montag, 21. November 2016 6:14 18
To Next Page
