Domino Ax Series User Manual

OPERATION
4-48 EPT019297 Issue 1 November 2016
Open and Edit a Label
To edit an existing label:
(1) From the Home Screen, select Label finder.
(2) Select the label which requires editing.
The label will open in the Label Creator. To edit the content within the Label Creator:
(3) Select an element to edit within the label design.
(4) Edit the item using the available settings in the side menu.
End of procedure.
Copy a Label Element
To copy an element within the label design:
(1) Select the element to copy.
(2) In the side menu, select the Element tab.
(3) Select the Edit menu.
(4) Select the Copy icon.
(5) Drag the new element to a suitable position in the label design area.
(6) Select the Save icon to save the change.
End of procedure.
Copy Multiple Label Elements
To copy multiple elements within the label design:
(1) In the side menu, select the Manage tab.
(2) Select the tick box next to the name of each element which will be copied.
Note: A red square will be displayed around each selected element in the label design area.
(3) Select the Element tab.
(4) Select the Edit menu.
(5) Select the Copy icon.
(6) Drag the new elements to suitable positions in the label design area.
(7) Select the Save icon to save the change.
End of procedure.

Domino Ax Series Specifications

General

Brand	Domino
Model	Ax Series
Category	Printer
Language	English