Domino Ax Series User Manual

OPERATION
4-20 EPT019297 Issue 1 November 2016
CREATING AND EDITING A LABEL
Create a New Label
To create a new label:
(1) From the TouchPanel’s Home Screen, select Label creator.
(2) Select Blank.
(3) Select the Label name text box.
(4) Use the on screen keyboard to enter a name which the label design will be saved as.
(5) Select the green Tick icon.
(6) Select the icon to configure the label layout as described in the table below:
(7) Select Create label.
End of procedure.
Setting Name Explanation
Number of lines Select the required number of lines, 1, 2, 3 or 5.
Line height (drops) Select the required height for each line in ink drops.
Type Select the required label quality.
Use default height (%) Tick the tick box to use the default print height setting.
Untick the tick box to display the Height (%) setting.
Height (%) Note: This setting is only valid if the Use default height (%)
tick box is not ticked.
Set the print height percentage.
Use default stroke pitch Tick the tick box to use the default stroke pitch setting.
Untick the tick box to display the stroke pitch (mm) setting.
Stroke pitch (mm) Note: This setting is only valid if the Use default stroke pitch
tick box is not ticked.
Set the distance between print strokes. A stroke is the line of ink
drops which is used to make up each printed character.

Domino Ax Series Specifications

General

Brand	Domino
Model	Ax Series
Category	Printer
Language	English