Information Section
-3
Maintenance
The Maintenance Section is a guide to equipment care.
The illustrated, step-by-step instructions are grouped by
servicing intervals. Items without specific intervals are
listed under “When Required” topics. Items in the
“Maintenance Intervals” chart are referenced to detailed
instructions that follow.
Maintenance Intervals
Use the service hour meter to determine servicing
intervals. Calendar intervals shown (daily, weekly,
monthly, etc.) can be used instead of service hour meter
intervals if they provide more convenient servicing
schedules and approximate the indicated service hour
meter reading. Recommended service should always be
performed at the interval that occurs first.
Under extremely severe, dusty or wet operating
conditions, more frequent lubrication than is specified in
the “Maintenance Intervals” chart might be necessary.
Perform service on items at multiples of the original
requirement. For example, at “Every 500 Service Hours
or 3 Months”, also service those items listed under and
“Every 10 Service Hours or Daily”.
Environment Management
Note that DOOSAN INDUSTRIAL VEHICLE is ISO
14001 certified which is harmonized with ISO 9001.
Periodic ENVIRONMENTAL AUDITS &
ENVIRONMENTAL PERFORMANCE EVALUATIONS
have been made by internal and external inspection
entities. LIFE-CYCLE ANALYSIS has also been made
through out the total product life. ENVIRONMENT
MANAGEMENT SYSTEM includes DESIGN FOR
ENVIRONMENT from the initial stage of the design.
ENVIRONMENT MANAGEMENT SYSTEM considers
environmental laws & regulations, reduction or
elimination of resource consumption as well as
environmental emission or pollution from industrial
activities, energy saving, environment-friendly product
design (lower noise, vibration, emission, smoke, heavy
metal free, ozone depleting substance free, etc.),
recycling, material cost reduction, and even
environmentally oriented education for the employee.
To Next Page
Loading...
Need help?
General
