Doosan G643E - Engine Flywheel Removal; Exhaust Manifold Removal

G643 (E) Service Manual Chapter 3. Engine Mechanical System 61
Tighten
• Coolant drain plug and/or knock sensor to
14 N·m (124 lb. in.).
• Drain plug to 25 N·m (18 lb·ft.).
Engine Flywheel Removal
Figure 12-3
Remove or Disconnect
1. Engine flywheel bolts.
2. Engine flywheel.
Figure 12-3 Engine Flywheel
Exhaust Manifold Removal
Figure 12-4
Figure 12-4 Exhaust Manifold
Remove or Disconnect
1. Exhaust manifold bolts and / or nut.
2. Heat shields.
3. Exhaust manifold.
4. Gaskets.