dormakaba USA Inc. System User Guide 7040.0320 | 20
3.8.1.3 Other Users
• The combination is in the format of 2 ID digits plus 6 to 9 combination digits
• In a multi-lock installation, the User may be enabled for some locks and disabled for others
• All User settings apply to all locks in a multi-lock configuration
• Users can be configured to have one or more capabilities
3.8.1.4 User Capability – Access Lock
A user may be allowed to open the lock. This capability allows the user to open the lock when they present proper credential(s).
Each access user may be granted individually the ability to bypass the time delay, if time delay is configured. If the system is in Dual
User Mode, either user with this option will cause the time delay to be bypassed.
3.8.1.5 User Capability – Audit Lock
A user can be given the capability to retrieve audits via a software application (authenticated via the ID and combo) or for review at
the Keypad via the menus. A user identified as one that can collect audits can retrieve audits from any lock that they have access to
via the software connected to the Keypad (and lock), or manually via the Keypad menus.
3.8.1.6 User Capability – Time Delay Override with Combination
This capability allows the user to override the time delay, if enabled for the user, with their combination and open the lock without
waiting for the time delay period to expire. They may or may not need a key fob for the second credential if required for Model 705.
3.8.1.7 User Capability – Time Delay Override with Fob Credential
This capability allows the user to override the Time Delay with their assigned fob credential, but they may not open the lock.
The Table below shows the permitted mix of capabilities a user may perform. The configuration software and lock firmware shall
enforce this capability mix.
Table 3 – User Capabilities
User can Override Time Delay only. May
not open the lock nor retrieve audits. The
user must present the FOB during an open
sequence initiated by an authorized user(s).