dormakaba USA Inc. System User Guide 7040.0320 | 43
5.4 Retrieve Audits
Follow these steps to pull Audits from the Keypad to the LA GARD Software client:
1. From the LA GARD Software Main Menu, select System.
2. Select the applicable System from the middle sub-menu.
3. From the top-right menu, select the PC Link icon.
4. Double-check the COM port or select a different port with the drop-down menu.
5. Select Audits from the left-hand column.
6. Plug the USB cable into the USB port of the computer and the other end into the mini USB port of the Keypad.
7. Using the Arrow buttons on the Keypad, navigate through the Main Menu and select PC Link by pressing the Return Key. The
top of the Keypad will illuminate red.
8. In the software client, select the Receive icon located at the top-right of the screen. A progress bar will appear on screen. The
Keypad will beep three times and flash a green LED once complete.
9. In the software client screen, navigate through the transactional data shown.
10. If necessary, select the Generate icon located at the top-right of the screen to open a new window with a report. Select the
applicable icon at the top of the window to Print, Enlarge or Save the report.
5.5 Add Time Lock Schedules
This section outlines how to add Schedules and Holidays from the LA GARD Software client to the Keypad. To assign Schedules and
view Holidays via the Keypad, refer to section 3.7 Assign Time Lock Schedules for more information.
Note: Entries with display screens can assign and view Access Schedules and view Holidays for a safe lock after they are loaded from
the software client (Model 703 Series of Keypad does not have this function). Entries without display screens will have those
Schedules and Holidays automatically assigned after being loaded from the software client.
Follow these steps add a Schedule(s) or Holidays from the LA GARD Software client to the Keypad:
1. From the LA GARD Software Main Menu, select System.
2. From Systems, select the Keypad from the list.
3. Under the System tab, in the Schedule 1 and 2 fields, select the Schedule from the drop-down menu.
4. Under the Holidays tab, check the Assigned box beside the Holiday you wish to add.
5. From the top-right menu, select the PC Link icon.
6. Double-check the COM port or select a different port with the drop-down menu.
7. Select Program from the left-hand column.
8. Check the boxes beside Holidays and Schedules.
9. Plug the USB cable into the USB port of the computer and the other end into the mini USB port of the Keypad.
10. Using the Arrow buttons on the Keypad, navigate through the Main Menu and select PC Link by pressing the Return Key. The
top of the Keypad will illuminate red
11. In the software client, select the Send icon located at the top-right of the screen. A progress bar will appear on screen. The
Keypad will beep three times and flash a green LED once complete.
Appendix A: # Commands
The following is the list of # Commands that is used in non-display Keypad models.
Please observe the following rules:
To Next Page
Loading...
