dormakaba USA Inc. System User Guide 7040.0320 | 27
1. Navigate through the Main Menu and select System.
2. Select Sys Info from the sub-menu.
3. Select between Keypad or Lock.
4. If Keypad is selected, the following information is available on screen:
• Battery Status – Displays battery level with a percentage
• FW version – Shows the current firmware version on the Keypad
• Model – Displays the Model # of the Keypad
• Serial Number – Shows the serial number of the Keypad
5. If Lock is selected, the following information is available on screen:
• FW version – Displays the current firmware version on the safe lock
• Port | Lock – Represents the Port and Lock #s
• Open Count – Shows how many times the safe lock was opened
3.9.2 Backlight Mode
The Backlight illuminates whenever a key is pressed on the Keypad. By default, the Backlight setting is Off to conserve battery power
(if applicable).
3.9.2.1 Backlight Mode – Display Keypad
Follow these steps to toggle the Backlight Mode On and Off on a Display Keypad:
1. Navigate through the Main Menu and select System.
2. Select Backlight from the sub-menu.
3. Select between Yes and No to Enable/Disable Backlight Mode.
4. Success Mode updated will appear on screen and the Keypad will beep three times and flash a green LED once complete.
3.9.2.2 Backlight Mode – Non-Display Keypad
Follow these steps to toggle the Backlight Mode On and Off on a non-Display Keypad:
1. Using the Keypad, input #40 + Authorized User ID and Combination + Off (0) or On (1) + Return Key.
2. The Keypad will beep three times and flash a green LED once complete.
To Next Page
Loading...
