dormakaba USA Inc. System User Guide 7040.0320 | 46
#50<Auth PIN><new user
PIN><user type><user lock
privileges><rtn key>
<Auth PIN>: Authorized User to
execute command
<new user PIN>: Initial PIN of
user being added
<user type>:2=Standard User,
4=Manager User
<user lock privileges> see Note
#50031234560465432125<rtn
key>
User Lock Privileges:
1 - Open Lock Only
2 - Audit Lock only
3 - Open + Audit Lock
5 - Open + TDO Combination
7 - Open + Audit + TDO Combination
Example: 03 user with 123456 combo
wants to add user 04 with initial combo
654321 as a standard user (2) and Open
prev and TDO priv when entering
credentials.
If target new user already exists, it will
result in error. If Auth PIN cannot create
user desired, error.
The user will default to Enabled with this
command. If the intent is to disable this
user initially, then the #54 command
should be immediately followed for this
user.
Auth user must be authorized to perform
command.
#52 <Auth PIN><New
PIN><Confirm PIN><rtn key>
#520312345603654321036543
21<rtn key>
User ID = 03, initial combo is 123456, new
combo is 654321. The 2 new PINS must
match. The ID portion of new PIN must
match the ID of the Auth PIN
#54<Auth PIN> <2 digit target
ID><0:disabled,1:enabled><rtn
key>
Auth ID = 03, Auth combo is 123456, target
User ID = 04; 1 for enabled. Auth user must
be authorized to perform command.
#55<Auth PIN><2 digit target
ID><user lock privilege><rtn
key>
Auth ID = 03, Auth combo is 123456, target
User ID = 04; user lock privileges = 5
User Lock Privileges:
See Add User command
Auth user must be authorized to perform
command.
#56<Auth PIN><2 digit target
ID><rtn key>
User ID = 03, combo is 123456, target User
ID = 04. Auth user must be authorized to
perform command.
#57 <Auth PIN><New User
PIN><Confirm User PIN><rtn
key>
#570312345604654321046543
21<rtn key>
Auth ID = 03, Auth combo is 123456, User
ID whose combo is being reset is 04, new
initial combo is 654321. The 2 new PINs
must match.