Dormakaba Saffire LX Installation Instructions

8 Saffire LX PK3704_T 02-19
4 Installation Steps
4.2. Step 2: Install turn knob spindle
• Verify that the line markers for the thumb turn hole are aligned. If the holes are misaligned, use a flat head screw-
driver to correct the position.
• Insert the thumb turn spindle item 2 (refer to table 2) into the thumb turn hole. Press firmly to ensure the spindle
clicks in place.
• Rotate the spindle to ensure that the part remains in place.
Index markers to be aligned

Dormakaba Saffire LX Specifications

General

Brand	Dormakaba
Model	Saffire LX
Protection Class	IP54
Access Method	RFID
Power Source	Battery
Operating Temperature	-30°C to 60°C (-4°F to 140°F)
Material	Stainless Steel