Dover OPW SiteSentinel iTouch M1500 - Mounting the Optional Printer Bracket

Doc. No.: M1500, Rev. 6
Page 16 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
1.7 Mounting the Optional Printer Bracket
Mount the printer bracket to the wall using Figure 5, below. Holes are 0.56 cm (0.177 in). Use as large a
fastener as possible, but ensure that the fastener does not protrude past the recess in the bracket.
Figure 4-2 Printer Bracket Mounting Dimensions