Dover OPW SiteSentinel iTouch M1500 - Appendix C - POS Interface

Doc. No.: M1500 Rev. 5
Page 84 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
Doc. No.: M1500, Rev. 5
Page 84 of 127
67733 Gross Point Road 900 Santa Fe Dr.Doc. No.:
M1500, Rev. 5
Page 84 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
•
Appendix C – POS Interface
This Appendix covers the physical connection between the SiteSentine1 and the Tokheim Fuel POS system.
SiteSentinel iTouch POS Port
If you order the SiteSentinel iSite with the POS option, a cable (part number 20-1586) will be included.
Use SiteConnect (from main menu: Configuration > SiteSentinel iTouch Port Parameters) to program the
following:
• Data Bits: 8
• Parity: NONE
• Stop Bits: 1
• Port: POS
• Connect Speed: 1200
Click OK when done to save the settings.
Prepare and Attach the Cable
The illustration below shows how to prepare a cable to connect the Enraf to the SiteSentinel iTouch POS port.