Dover OPW SiteSentinel iTouch M1500 - Dip-Switch

Doc. No.: M1500 Rev. 5
Page 98 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
Doc. No.: M1500, Rev. 5
Page 98 of 127
67733 Gross Point Road 900 Santa Fe Dr.Doc. No.:
M1500, Rev. 5
Page 98 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
•
Status Indicators
NOTE: Flashing LEDs indicate certain current activities of a specific device, which follows:
RX: Receiving data
TX: Sending data
CTS: Clear to send
Dip-Switch
NOTE: DIP-Switch 1 is used for internal selection ONLY. Use the “On” position to select external modem;
the “Off” is for internal modem. Once the dip-switch is changed, the SiteSentinel iTouch controller needs to
be restarted. Dip-switch 3 is to select display type. Use “ON” for touch screen and “OFF” for keypad.