Dover OPW SiteSentinel iTouch M1500 - Page 20

Doc. No.: M1500, Rev. 6
Page 20 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
To install, simply insert the surge protector in series between the incoming communication lines and the I/O
port of the SiteSentinel iTouch. The surge protector ground wire must be connected to the metal chassis of the
SiteSentinel iTouch or to the ground lug within the SiteSentinel iTouch. Each port requires one surge protector.
Figure 4-6 External Surge Protector I/O Port Connection