Dover OPW SiteSentinel iTouch M1500 - Page 34

Doc. No.: M1500, Rev. 6
Page 34 of 127
• 67733 Gross Point Road 900 Santa Fe Dr.
Figure 9-5 Assembling the Epoxy Sealpack for Waterproof Electrical Connections
It is VERY important to seal all probe and sensor connections in the junction
box to prevent corrosion of the wires.
To make the connections waterproof, use the supplied SCOTCHCAST
™
epoxy-resin Insulating Resin
Sealpacks. They are provided to seal the electrical connections from moisture and water, and prevent corrosion
of the connections. Install one for each cable connection.