89
English
6. Operation
6.1
Getting Started
(When the DiSEqC Motor parameter is set as USALS)
▪ Move: Move the dish position to west/east by pressing buttons.
▪ Motor Control: Control motor by press OK button ot the remote.
▫ Goto Reference: Goto reference by pressing OK button.
▫ Set West Limit: Edit & Save west limit by pressing or OK buttons.
▫ Set East Limit: Edit & Save east limit by pressing or OK buttons.
▫ Enable Limit: Enable the saved east and west limit.
▫ Disable Limit: Disable Limit by pressing OK button.
▫ Save: Save the current Setting of USALS system.
▪ Sat Degree: Displays the current defree of the selected satellite.
Edit degree by pressing buttons and numeric buttons.
▪ Position Setting: Select position setting by pressing OK button.
▫ Goto Reference: Move the dish to the 0 position.
▫ Antenna Longitude: Edit antenna longitude by pressing buttons and numeric buttons
▫ Antenna Latitude: Edit antenna latitude by pressing buttons and numeric buttons
▪ Go To: Save the current setting of USALS System.
[2012.10.12]D15+F15_russian+english.indd 89 2012-10-12 11:23:06
To Next Page
Loading...