106
➐
IP Setting
If the Network supports DHCP, IP settings can be allocated automatiocally. If the Network
does not support DHCP, the Addresses must enter manually(Static IP). <Figure 6.2.7>
▪ DHCP Usage: On/Off to receive IP settings automatically.
▪ IP Address: Enter the IP address.
▪ Subnet Mask: Enter Subnet Mask Number from your Network.
▪ Gateway: Enter IP address of Gateway (e.g.router).
▪ DNS: Enter IP address of main DNS server.
▪ MAC Address: MAC address display.
6. Operation
6.2 System Setting
Figure 6.2.7
[2012.10.12]D15+F15_russian+english.indd 106 2012-10-12 11:23:12
To Next Page
Loading...