Description of the analyser
20.08.2012 Page 12 of 42 Rev. 04
3 Description of the analyser
3.1 Introduction
This chapter describes the measuring principle, the construction and accessories
and the consumable materials for the analyser.
This chapter provides preliminary information – but you can find more details on
the operation and function of the equipment in the chapters “Operation – Part 1”
and “Operation – Part 2”.
3.2 Purpose
The SUPER GL easy / easy+ analyser is an automatic analyser for the
determination glucose and / or lactate
and / or hemoglobin
in 1+50 diluted
samples, e.g. in hemolysed blood samples.
Possible sample material:
- capillary or venous or arterial blood
- serum (not for hemoglobin)
- plasma (not for hemoglobin)
- cerebro-spinal fluid (not for hemoglobin)
- for more materials ask the manufacturer
The blood taken may contain the following anticoagulants / glycolysis inhibitors:
heparin, citrate, fluoride, EDTA.
When using non-flouride-stabilized sample
material, the 15-minute period from taking the
sample until stabilising with haemolysis system
solution should not be exceeded.
The diluted sample material identified with haemolysis system solution is
removed from closed reaction cups.
In detail, the equipment features the following performance characteristics:
- Determination of glucose and / or lactate
using the enzymatic-
amperometric measuring principle
- Determination of hemoglobin using photometric measuring principle
- Automatic individual sample measurement
- Automatic calibration
- Serial printer interface
- Serial RS 232 electronic data processing interface
- Interface for PS/2 keyboard or bar code reader
depending on sensor type
depending on model of equipment
To Next Page
Loading...