Dr.Muller SUPER GL easy - Technical Data

Technical data
20.08.2012 Page 42 of 42 Rev. 04
7 Technical data
Measuring time per sample
Glucose and/or lactate

Additional hemoglobin
40 sec
90 sec
Measurement range
Glucose
Lactate
Hb
0.8 – 50 mmol/l (11 - 910 mg/dl)
0.5 – 30 mmol/l (4.5 - 270 mg/dl)
1.86 – 15,52 mmol/l (3.0g/dl - 25
mg/dl)
Sample quantity
10 / 20 µl sample diluted with 500 / 1000
µl haemolysis solution
Precision (24 samples)
Glucose (216 mg/dl)
Lactate (90 mg/dl)
Hb
< 2.0 % with 12.0 mmol/l
< 2.5 % with 10.0 mmol/l
< 1.0 % with 7.6 mmol/l
Sensor storage time
12 months
Sensor storage temperature
+ 2°C to + 8°C
Duration of sensor operation
Glucose 6 months
Lactate, glucose/lactate 3 months
Interfaces
Printer
EDP
Parallel, centronics
V 24, RS 232
Work temperature
+ 15°C up to + 35°C
Storage temperature (without sensor)
- 10°C up to + 50°C
Operating voltage
12 V DC
Power consumption
Approximately 10 W
Classification according to MPG
[German Medical Devices Act]
In vitro diagnosis
Dimensions (W x H x D)
200mm x 150mm x 170mm
Weight
approximately 2.0 kg
Manufacturer
Dr. Müller Gerätebau GmbH
Burgker Str. 133
D-01705 Freital
Fig. 7.1 Table Technical data

depending on sensor type