Operation – Part 2
20.08.2012 Page 35 of 42 Rev. 04
5.6. Quality Control
In general there are national instructions for quality control of clinical analyses.
These instructions are obligatory for all medical users.
In Germany there are the “Guidelines of the Federal General Medical Council for
Quality Assurance in Medical Laboratories (RiliBÄK)” in their valid version. The
responsible person for the device has to catch up the valid rules.
Self contained the software of the SUPER GL easy / easy+ affords following
support of quality control:
- The Super GL easy stores the measuring values of active controls in
separate control memories. From there they can be transferred to a data
card and processed further with a PC.
- If controls are activated, all results up to the first correct measuring of this
control are marked with an “!”. This shows that there is no correct result
for one control.
Possibly a simplified quality control at so called POCT –
analysis is allowed (point-of-care-testing). Not every
control material is usable non-restrictive for using our
device. If there are any problems, contact your
distributor.
To Next Page
Loading...